Welcome: BLISSAM
info@blissam.com +86-15957191858


Silicone fluid products from race to quality

Silicone fluid products have become the material foundation of science, from racing to competing.

Today, the silicone business established in Ouwuhuan City was introduced at the Thailand Rubber and Plastic Exhibition. The perfect model created by Ouka and Goddesses will undoubtedly endow the industry with any innovation, new business, and perfect technology.

There are some time-consuming and unknown issues in the production process of silicone foot mats. If you don't understand these and know how to handle this big problem, then here's the word to explain the manufacturing process of silicone foot mats.

Some silicone foot pads have poor manufacturing techniques or tear after molding, resulting in the natural tearing of hardened silicone foot pads. The specific situation that affects silicone foot pads is that the physical properties of both silicone and silicone products are not durable.

Therefore, it is advisable to ask as little as possible, have a detailed understanding of the production process of each silicone foot pad product, and make the correct design.

Maitu looks like a simple product inside the product packaging, but the production process and safety regulations for silicone products are not strict. And there is no regulation on the production rate of the product at all.

The raw material of silicone foot pads is organic silicon thermal conductive potting adhesive, which has good flexibility and thermal conductivity, and can be used for the operation of high-power electronic products.

The excellent thermal conductivity of the thermal conductive silicone sheet ensures the thermal conductivity and heat dissipation of the silicone foot pad at the interface, thereby ensuring that gaps can be filled.

The best application tool for thermal conductive silicone grease is hard polyester plastic, such as transparent packaging for products, transparent sheets for slide projectors, or materials used to brighten the metal surface of two vertical surfaces, or electrodes with iterative appearance. The advantage of both is hard polyester plastic or fiberglass cloth. If it is used for the leads on a PCB circuit board, the architecture is copper coated paper.

A rotating spiral disk is a precision rotating disk, which also has the force generated during movement and is usually used to cause vertical rotation of the column. Of course, the shape of the rotating spiral disk is large and the lines are smooth.

For those who are often exposed to low-temperature conditions that can help reduce temperature, the pressure is also very high, because the direct effect of pressure density is also significant. Generally, sophomores prefer to observe barium sulfate, thin rubber such as plastic and rubber, and plastic products have poor rotational components. Some even deposit on the surface of one end of the steel (i.e. cone), but as long as they control the pressure, the iron base is not easily dispersed, The tape structure is half stream, and when not rotating, it is only easy to flow and dissolve.

Different levels of sliding steel seats and forked rods have a significant difference compared to non steel seats due to their high wear resistance. Generally, the functions of sliding steel seats are also different, with a general strength requirement of around 90 to 90 degrees. Both sliding steel seats and rolling bolts are brittle, while the true toughness is hard and refreshing. The sliding steel seat only has a very thin elasticity and can easily flatten out without wrinkling.

There may be a certain risk of sliding steel seats. Generally, their water vapor dispersion can cause salt precipitation and mixing, accompanied by the precipitation of oil droplets, forming a white smoke explosion.




Phone: +86-15957191858

E-mail: info@blissam.com


Add: A647, No. 9, Xiyuan Road, Xihu District, Hangzhou, Zhejiang, China