Welcome: BLISSAM
info@blissam.com +86-15957191858


10 silicone resin knowledge, come and learn more

Knowledge of silicone resin, come and learn more.

Silicone is a semiconductor (also known as silicone rubber/silicone resin), belonging to the category of silicone rubber. When making products, we often use silicone molds for demolding. However, using silicone molds for demolding on some silicone molds is actually incorrect, but the use of silicone may not necessarily achieve certain results. So how can we make it the first choice for users? I hope a useful silicone product factory can ensure my own health.

Comparing the types of silicone and curing agent, a simple choice can be made from two aspects: silicone and curing agent. Generally, the service life of silicone at 200 degrees Celsius is 30 to 30 years or more, the cost of large-scale use is 10 yuan, and the cost of small-scale use is not more than 50 yuan.

Under the action of a hydrogen platinum catalyst, the active substances of silica gel and curing agent can react to form a phase OH oligomer. With the appropriate use of a dispensing machine for solidification, the six side effects of the solidified silica gel mold can also be quickly reacted and recognized by customers.

The active substances of silicone and curing agents can cause shrinkage of molecular systems, such as carbon granite, marble, floor wax, release agents, etc.

The reason for selecting the release agent is that the structure of the release agent may not be sufficient, but its properties are actually a functional substance between the mold and the finished product, that is, the surface wax before foaming and powder addition of the release agent.

The demolding principle of demolding agent is that after molding and injection molding, a layer of material with a membrane nature is formed on the surface of the injection molding. When the liquid drips, there are no bubbles on the surface, or the demolding agent encounters water, a lotus leaf effect is formed, and there is repeated demolding phenomenon. The demolding agent is poured, but only continuously demolding on the mold.

Release agents are non hazardous materials. When important release agents such as amine come into contact with fillers and rubber plastic release agents, the surface tension will not decrease and will gradually stabilize.

The general application of silicone oil in molds is to form a layer of isolation film on the surface, which makes it difficult for silicone oil to separate again

The safety of release agent is because it can quickly and effectively block the surface of the mold, while also transferring the patterns on the mold to the surfaces of toys, glasses, medical and health care, transportation, wood, and other materials.

The protection of the optical and component surfaces allows the residual dust and garbage on the film to be transferred to the surface of the processed parts, reducing the mold temperature.

Mold release agents for automotive parts are hot repair products manufactured in automobiles, referring to labels coated with acrylic markings and other similar auxiliary materials on the surface. One end of the adhesive force between the rubber and the mold core paper is the same as the real mold, and the relationship between the metal and the mold can be clearly seen on the surface of the mold.

Sunscreen agents, also known as isolation agents, are classified by the materials used in many households. They belong to different chemical substances with different components. We improve their performance by using parameters such as performance, reliability, and waterproofing. The following is an introduction to the types and uses of makeup products.




Phone: +86-15957191858

E-mail: info@blissam.com


Add: A647, No. 9, Xiyuan Road, Xihu District, Hangzhou, Zhejiang, China